Sintering, microstructure and properties of WC-AISI304 powder composites
Tungsten carbide-stainless steel (AISI 304) based composites were successfully prepared by powder metallurgy routes using vacuum sintering at a maximum temperature of 1500 degrees C. The effects of the binder amount (between 6 and 15 wt.%) on the phase composition, microstructure and mechanical prop...
| Autor principal: | |
|---|---|
| Outros Autores: | , |
| Formato: | article |
| Idioma: | eng |
| Publicado em: |
1000
|
| Assuntos: | |
| Texto completo: | http://hdl.handle.net/10773/20698 |
| País: | Portugal |
| Oai: | oai:ria.ua.pt:10773/20698 |