Development of polyaniline microarray electrodes for cadmium analysis

Disposable screen-printed electrodes (SPCE) were modified using a cosmetic product to partially block the electrode surface in order to obtain a microelectrode array. The microarrays formed were electropolymerized with aniline. Scanning electron microscopy was used to evaluate the modified and polym...

ver descrição completa

Detalhes bibliográficos
Autor principal: Oliveira, Marta (author)
Outros Autores: Viswanathan, Subramanian (author), Morais, Simone (author), Delerue-Matos, Cristina (author)
Formato: article
Idioma:eng
Publicado em: 2013
Assuntos:
Texto completo:http://hdl.handle.net/10400.22/2043
País:Portugal
Oai:oai:recipp.ipp.pt:10400.22/2043
Descrição
Resumo:Disposable screen-printed electrodes (SPCE) were modified using a cosmetic product to partially block the electrode surface in order to obtain a microelectrode array. The microarrays formed were electropolymerized with aniline. Scanning electron microscopy was used to evaluate the modified and polymerized electrode surface. Electrochemical characteristics of the constructed sensor for cadmium analysis were evaluated by cyclic and square-wave voltammetry. Optimized stripping procedure in which the preconcentration of cadmium was achieved by depositing at –1.20 V (vs. Ag/AgCl) resulted in a well defined anodic peak at approximately –0.7 V at pH 4.6. The achieved limit of detection was 4 × 10−9 mol dm−3. Spray modified and polymerized microarray electrodes were successfully applied to quantify cadmium in fish sample digests.