Autonomous MEMS Inclinometer
Pull-in voltage measurements are used in this work as the transduc-tion mechanism to build a novel microelectromechanical system (MEMS) incli-nometer. By successively bringing the microstructure to pull-in while measur-ing the pull-in voltage allows the detection of external accelerations. Moreover,...
| Autor principal: | |
|---|---|
| Outros Autores: | , , |
| Formato: | conferencePaper |
| Idioma: | eng |
| Publicado em: |
2012
|
| Assuntos: | |
| Texto completo: | http://hdl.handle.net/1822/21192 |
| País: | Portugal |
| Oai: | oai:repositorium.sdum.uminho.pt:1822/21192 |
| Resumo: | Pull-in voltage measurements are used in this work as the transduc-tion mechanism to build a novel microelectromechanical system (MEMS) incli-nometer. By successively bringing the microstructure to pull-in while measur-ing the pull-in voltage allows the detection of external accelerations. Moreover, the availability of asymmetric pull-in voltages that depend on the same mechan-ical structure and properties enables the implementation of an auto-calibrated thermal compensated inclinometer. The thermal compensation method is de-scribed and it relies on the measurement of pull-in voltages only. Both simulations and experiments are used to validate this novel approach and first results show a sensitivity of 50mV/º and a resolution of 0.006º |
|---|