Lithium fluoride injection layers can form quasi-Ohmic contacts for both holes and electrons

Thin LiF interlayers are typically used in organic light-emitting diodes to enhance the electron injection. Here, we show that the effective work function of a contact with a LiF interlayer can be either raised or lowered depending on the history of the applied bias. Formation of quasi-Ohmic contact...

ver descrição completa

Detalhes bibliográficos
Autor principal: Bory, Benjamin F. (author)
Outros Autores: Rocha, Paulo (author), Janssen, Rene A. J. (author), Gomes, Henrique L. (author), De Leeuw, Dago M. (author), Meskers, Stefan C. J. (author)
Formato: article
Idioma:eng
Publicado em: 2018
Assuntos:
Light-Emitting-Diodes
Alkali-Halides
Al/Lif Electrode
Excitation
Texto completo:http://hdl.handle.net/10400.1/11947
País:Portugal
Oai:oai:sapientia.ualg.pt:10400.1/11947
Descrição
Resumo:Thin LiF interlayers are typically used in organic light-emitting diodes to enhance the electron injection. Here, we show that the effective work function of a contact with a LiF interlayer can be either raised or lowered depending on the history of the applied bias. Formation of quasi-Ohmic contacts for both electrons and holes is demonstrated by electroluminescence from symmetric LiF/polymer/LiF diodes in both bias polarities. The origin of the dynamic switching is charging of electrically induced Frenkel defects. The current density-electroluminescence-voltage characteristics can qualitatively be explained. The interpretation is corroborated by unipolar memristive switching and by bias dependent reflection measurements. (C) 2014 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution 3.0 Unported License.

Registos relacionados